How to login to wavlink extender?
Searching for the right guidance to log in to the Wavlink range
extender? This article explains how to do the Wavlink login and access the http://ap.setup Wavlink setup page. Here, you will also
find some troubleshooting tips to resolve the ap. setup login issues associated
with Wavlink.
Instructions to
access the Wavlink login page
You can easily manage and configure the Wavlink extender using the
web-based utility method. To get started with the login process, you need a few
things:
❖
Wavlink repeater
❖
Modem/Router
❖
A PC or smartphone
❖
Ethernet cables
Hardware setup
●
Before you log in, make hardware installation and connection.
●
Firstly, plug in the Wavlink wifi extender to a power socket and turn
on the device.
●
Secondly, place your Wavlink device next to your home router to
connect both devices.
●
Use the included Ethernet cable and connect it from the router to your
Wavlink range extender.
●
Now, connect your PC to your Wavlink repeater using another Ethernet
cable.
Log in to the
http://ap.setup Wavlink
●
From your computer, launch a browser and type 192.168.10.1 or http://ap.setup in the address field. Next, the Wavlinklogin admin page will appear. Enter the default admin details on this page.
●
Check the default admin username and password in the Wavlink extender
manual or on the product label.
●
Input these login details in their respective fields and click login
to access the http://ap.setup Wavlink setup page.
●
On the ap. setup interface, click on the Quick Setup to launch the
setup wizard.
●
Next, the Wavlink setup wizard will walk you through the entire setup
process step by step.
What if I can’t
access the Wavlink login page?
There is a range of factors that may cause login problems in your link wifi repeater. You can fix those problems by following the below
solutions. Just make sure to connect the Wavlink extender to the computer using
a wired connection to make the process smooth and easy.
●
First, check the connections and the LED status on the Wavlink
extender.
●
If the LAN LED light is off, then connect your PC to Wavlink’s LAN
port properly or change the Ethernet cable with the new one.
●
Next, set up your PC to automatically obtain an IP address. If still,
you are unable to log in to the Wavlink device, continue to the next step.
●
You should close your current browser and then try to open a different
one to access the Wavlink web GUI.
●
Also, try deleting the cookies, a cache of your current browser.
●
If the problem still persists, press and hold the reset button located
in a pinhole on the side panel of the Wavlink device.
●
Hold the reset button for about 10 seconds and when the status LED
becomes stable, release the button.
●
With the Wavlink factory reset, all the customized settings will be
erased. You need to perform the Wavlink repeater setup again.
Conclusion
So, this was all about how to log in to the Wavlink repeater. If you
are still facing issues while logging into the Wavlink device, contact our
technical experts. For further assistance with the ap. setup login, you can dial
our toll-free number or do a live chat today.
Thanks for this valuable information on wavlink extender
ReplyDelete